RF HAMDESIGN

SPX-06 AZ&EL/HR

Azimuth & Elevation Rotor System SPX-06/AZ&EL/HR

SPX-06/AZ&EL/HR

Mounted on STR-08/105 Pedestal = optional

SPX-06/AZ&EL/HR Antenna rotor is designed to rotate in Azimuth & Elevation plane.

SPX-06/AZ&EL/HR is supplied incl controller and software.
Positions sensors are HALL Effect sensors.

Model SPX-06/AZ&EL/ABS is performed with Absolute Encoders.

Ready to use AZ & EL rotor incl software

MD-02 Dual-Axe SPX-06/AZ&EL/HR controller.

SPX-06/AZ&EL/HR is supplied incl controller, model MD-01 or MD-02 which is standard loaded with our new firmware

Unique AZ&EL Rotor System in this price range:.......

With this new MD-0x software you can control a AZ&EL Antenna rotor by using your favorite Azimuth and Elevation tracking software
Connect the MD-0X controller to your PC, install you favorite track program, sent Azimuth and Elevation data to the controller and the rotor will rotate in AZ & EL plane
It is also possible to drive the controller by manual use during front buttons on front of the controller.

Setup SPX-06/AZ&EL/HR rotor system

UA-02 Bracket mounted to SPX-06/AZ&EL/HR

UA-02 is optional

To control the rotor through the MD-01 or MD-02 controller you need 4-core control cable for motor (1.5mm2) and 6-core shielded control cable for positions control

* SPX-06/AZ&EL/HR will handle heavy Duty systems arry's and 1 - 4.5Meter diameter RF HAMDESIGN Mesh Dish.

Note: For smooth Azimuth & Elevation rotation it is recommended to add counterweights.

UA-02 Bracket mounted to SPX-06/AZ&EL/HR

UA-02 is optional

A perfect combination is to ad UA-02 Antenna mounting Bracket, this UA-02 is supplied incl heavy duty mounting surface and counter weight arms (counter weights are not included, simple use exercise dumbbells.)
The UA-02 bracket is interfaced to the rotor by a 45....48mm round pipe (Not included delivery UA-02)

Optional available a SPID PS-01 or PS-02 power supply which fits perfect to MD-01 / MD-02


SPX-06/AZ&EL/HR supplied included:

SPX-06/AZ&EL and STR-08/105

(STR-08/105 is optional)


* SPX-06/AZ&EL/HR main body rotor + Flat plate mounting platform
* Postions sensors: Hall Effect Sensors
* MD-01 or MD-02 Rotor Controllor with Display
* MD-01dde Software (to control rotor from PC)
* Build in track interface and version v2.0.xxx Firmware (USB)
* IP-68 Connectors
* Connectors used for control cable and power supply
* Fast setup document (RF HAMDESIGN Document)
* Free and fast reply during support questions
* Acces RF HAMDESIGN SPX and SPID Technical Support page

MODEL / OPTION PRICE
Rotor System, Supplied incl. Controller type MD-01 or MD-02, software.
Part number: SPX-06/AZ&EL/HR
Actual Price: Refer price list
Ethernet Module
Part No: SPID ET
Actual Price: Refer price list
CCM - CURRENT CONTROL MODULE measurement tool both motors.
Part number: SPID-CCM
Actual Price: Refer price list
Power Supply AC input 100 ~ 240 Volt AC / Dual voltage output DC
Part number: PS-01 or PS-02
Actual Price: Refer price list
Control cables, Pedestal, more options, check Specifications sheet. Actual Price: Refer price list
Antenna Mounting Bracket, Steel / Galvanized.
Part No: UA-02
Actual Price: Refer price list
Spare Connector Set MD-0X or PS-0X
P/N: MD-X15
15,00
Download Specification Sheet

Download SPX-06/AZ&EL Spec. sheet

Price SPX-06/AZ&EL/HR rotor system incl MD-01 or MD-02 Controller

SPX-06/AZ&EL/HR suplpied incl controller MD-01 or MD-02
Actual price, refer price list, Part Number: SPX-06/AZ&EL/HR

Shipment is to lot's of countries possible, we will be
glad to
E-mail you a quotation, or use the Quote request page.

All prices in EURO, if your delivery address is outsite the EU countries no V.A.T. applies, and no VAT applies, if you are inside the EU countries and holding a V.A.T. number.