ELAD FDM-DUO

ELAD FDM-DUO ALL MODE

FDM-DUO is a SDR tranceiver that offers the possibility to operate stand-alone like traditional radio or attached to a Personal Computer discovering the possibilites offered by the SDR technologies.

• RX:
• Freqency range: 10KHz - 54MHz
• Direct conversion receiver operating @ 122.88MHz ADC: LTC2165 16bit
• DDC (Digital Down Converter) FPGA Xilinx Spartan.6 family down to 192Ksps
• DDC, Filter & Demodulator ARM STM32F429 floating point microcontroller
• Demodulation CW, LSB, USB, AM, FM
• LSB,USB Filters selectable 1600-3100Hz Bandwitdh with 100Hz step plus 4000-5000-6000 Hz Bandwitch
• AM Filter selectable from 2500 to 6000Hz with 500Hz step
• CW Filters 2600Hz-1500-1000-500-300-100Hz Bw plus 4 Cw peak filters applied after 100Hz Bw to obtain an overall filter of 20Hz Bw
• Noise Reduction 10 levels
• Noise Blanker 10 leves
• VFO A, VFO B, 199 MEMORIES with Frequency/ Alphanumeric label visualization, programmable by FDM-SW2 memory manager
• Programmable BAND selections: selectable up to 20 quick recallable memories from 180 to 199

• TX:
• DDS AD9957 with 368.64 MHz clock
• Microphone input ADC 48KHz @16bit selectable gain -12dB to +12dB
• Key and Paddle input for CW operation (Iambic A e Iambic B selectable)
• 5W min power output from 160m to 6m, 8 W typ output @14MHz
• PTT Output connector to drive external amplifiers

• GENERAL:
• All programmable components (ARM RX, ARM TX, Flash for FPGA, User Interface microcontroller and USB controller) are firmware upgradable
• CAT input USB control interface with FTDI controller
• Antenna connectors: RTX SO-239, RX SO-239
• Monitor output: 0dBm SMA to be used as test equipment allow the use as a Digital RF Generator
• LCD Backlight RGB programmable, depending on function can change the colour (RX, TX , PC remote control)
• 10MHz Reference input connector: SMA
• Power supply: 2.1mm DC Plug 13.8VDC RX consumption 500mA typ (13.8V) TX: tbd
• Size: Witdh 180mm (7.00") x Depth 155mm (6.10") including Knob and connectors or 130mm (5.10") only enclosure x Height 70mm (2.75")
• Weight: 1.2Kg (2.4 lb), shipment package 2.2Kg (4.85 lb)

• MORE:
• Up to 9 simultaneous receivers combination ( 1 on center frequency stand alone, 4 FDM-SW2 in fist 192kHz channel and 4 in the second 192kHz channel
• Each receiver on FDM-SW2 have a dedicated Audio Channel and a dedicated CAT to be usable from external application with Visrtual serial ports and Virtual Audio Cables
• Selectable Band configuration from 192kHz to 6MHz DDC bandwith (192,384,768,1546,3072,6144Ksps) 2 channel 192Ksps, 2 channels 384Ksps
• RX and TX SPLIT mode operation: VFO A for RX while VFO B used for TX (with FDM-SW2 simple click operation to change TX frequency)
• CW skimmer integration management (DX Spot visualization & tuning capability)
• Direct digital Modulation using USB soundcard based on CMedia chipset digitally interfaced with ARM floating point microcontroller and DDS

FDM DUO is supplied Included:

- 3 × USB A/B cable
- 1 × USB adaptor to USB Micro-B
- 2 × Audio cable stereo 3.5 mm phone plug
- 1 × Audio extension cable stereo 3.5 mm phone plug
- 1 × DC power cable with connector, other side open
- 1 × 9 pin D-Sub plug
- 1 × USB stick with FDM-SW2 Software, handbooks in english and italian (PDF)
- 1 × Hand microphone, Electret type, RJ-45 connector, Icom compatible
- 1 × Quick Start Guide

REQUEST OR ORDER.....

ELAD FDM DUO is available in Black and Silver model

PRICE ELAD FDM DUO BLACK EUR SOLD OUT
PRICE ELAD FDM DUO SILVER EUR SOLD OUT

E-mail your request, we will provide you all details to order.

All prices are inc. 21% VAT, if your delivery address is outsite the EU countries no V.A.T. applies, and no VAT applies, if you are inside the EU countries and holding a V.A.T. number.