3 Meter MESH DISH KIT F/D=0.45

RF HAMDESIGN 3 Meter PRIME FOCUS MESH DISH KIT (F/D=0.45)

This MESH DISH KIT is easy to assemble, 20mm square tube aluminium is used for the 12 rib contruction which are pre-assembled and ready to place at the 20cm, 10mm thickness CNC Milled aluminum centers.
The DISH KIT is supplied with a 3 or 4 leg feed support, all assembling parts and 6mm square mesh, which can be used up to 6cm band (max 6GHz).

You only need a hand driller, a hand riveter, Spanner No:10, a hand cutter, Wire Mesh cutter and some time to assemble this DISH KIT.
More 3 meter RF HAMDESIGN DISH pictures

New orders for 3.0 Meter Dishes will be February / March 2025 shipment currently.
(Only available with F/D=0.45)

Last update: 20-12-2024

• 2 pcs CNC milled centers (Hub) are used to mount rib's
• HUB is 20cm round, 10mm thickness aluminium Plate !
• Rib's made of 20mm sq aluminium tube
• 4 inner rings are used to secure mesh
• Galvanized Mesh 6mm gap

• Outher rim made of 3x20mm aluminum strip
• Mesh secured by using of 2x20mm aluminum strip
• 3 or 4-Leg feed support 15 or 20 square aluminum tube
• Special U-clamp used for heavy duty 4-leg feed support
• As option available rotor/dish mount clamp

This 3 Meter DISH KIT can be used with SPID Azimuth & Elevation rotator BIG-RAS (HR) or SPX-05 / 06.
(Dish with dish feed installed needs counter weights !)

More info regarding Spid AZ&EL rotator.

Available is a mounting bracket to interface rotor and 3M dish to SPID or SPX Rotator

We advise model:

Type BR03
or model
Type UA-02

More info and prices rotator rotator Mounting bracket

3 Meter Dish KIT delivererd inc. all mounting parts,
........all nuts (stainless steel)
........all bolts (stainless steel)
........all blind pop-rivets (incl. 4.1mm bore)
........3 or 4-leg feed support (depends on dish feed)
........mesh 6mm square / Galvanized steel
........CNC milled aluminium center
........do It Your Self manual incl lot's of picture's

This DISH KIT does Not include: Mast clamp, Dish feed / clamp.

We do ship daily World-Wide and will be glad to E-mail you a quotation.
1pc 3 meter Dish Kit will be packed in 2 shipping carton.

Full setup Bundle:
To buy a full set 3M Mesh Dish including rotor system we made a setup with all the necessary parts:

This Bundle price is included: 3M0 Dish + Rotor system 0.1 degree resolution and controller + Control cable set + Rotor Power supply + Bracket to interface Dish and rotor
Download the bundle documentation [455 KB]

Specifications sheet:
Download 3 Meter Mesh Dish KIT Specifications Sheet [434 KB] in PDF formats.

Due to the many requests we have summarized a complete list for an EME 1296MHz Setup HAM Radio Station.

This 3.0 Meter Mesh Dish Setup for 1296MHz EME is a Bundle setup completed incl all parts to start with EME (Earth-Moon-Earth) communication.
Not included is a Preamplifier, Receiver, Transmitter, coax cables etc.
But In a few words, a fully matched passive system to start with EME with an 3.0M dish + Moon Autotrack Rotor system and Circular Dual Mode dsh feed.

User info 3.0 Meter DISH 1296MHz:
Using 50....60Watts RF Output it is possible to operate various EME stations. A minimum of 150 Watt RF Output is required to hear your own echoes.
(Note: The RX Parts of your system should be in perfect condition with at least a 0.5dB NF preamplifier)
Above info is based by use of digital mode WSJTX


Download Full 3M0 Bundle list 1296MHz EME [355 KB] in PDF Formats.

ORDER ONLINE: ORDER FORM

RF HAMDESIGN design and manufacture a wide range of RF DISH Feeds....

We can offer Linear single band up to a 5-band dish feeds from 1-10GHz, Helix dish feeds with Left Hand Circular Polarization from 1-4GHz, Dual Mode LHCP / RHCP Septum Dish feeds, High power single band Horn Dish feeds. (more DISH FEEDS)

We will be glad to E-mail you a quotation for your own frequency request, or use the Quote request page.

Bracket used to mount your dish in a fixed position

This bracket can be fixed in elevation from 0 to max 90 degree.
Supplied including mast mounting bracket
BR-50B can be used with our Mesh Dishes up to 3 Meter diameter.

Weight: 6 Kg
Material: 5mm laser cut Steel plate, painted Black
Max. Mast mount standard 63....66mm diameter

Price BR-50B: Refer PRICE list

More pictures: Accessories part