SPID, type RAK/HR AZ ROTOR

#1 Now available new model SPID RAK/HR:
New pulse count electronincs and new IP-68 Connector set.

SPID HIGH RESOLUTION ROTOR for Azimuth Rotation
RESOLUTION: 0.2 Degree !

SPID RAK/HR and MD-02 is a high persision (track) rototator system
Rotor Controller MD-02 has many functions which can be configured by the user.
For continuous operation a Dual Voltage power supply, type PS-02 is recommend.

SPID RAK/HR rotor is a Single engine rotor which has installed a position sensors (transsmision 0,125 degree on impulse) counting will be 0,1 degree on impulse and readable at the display.

To control the rotor through the MD-02 controller module you need 2-core control cable (2*1.5mm2) to control the Azimuth engine and 4-core to detect the positions sensors.

* SPID type RAK/HR will handle Medium systems arry's or multiple installations placed one above the other.

SPID RAK/HR rotator can be mount on a pipe of max. 68mm.

SPID RAK/HR set is delivered incl.

* High Resolution RAK/HR Rotor
* MD-02 Rotor Controllor with Display (option MD-01, 19" rack mount)
* Build in track interface MD-02 (USB)
* MD-01dde Software (to control rotor from PC)
* USB driver
* Connectors

* Double metal worm gear drive reduction for holding position in the wind
* High torque low voltage DC motor.
* Electronic HALL Sensor for position.
* Low backlash.
* Uses 2 core controll cable connection (2 for each rotator)
* Uses 4 core controll cable connection for Position sensor
* Free Firmware update through Serial port (free of charge)
* Turning speed rotator: refer Specifications sheet
* Many track software supports the SPID protocol: Rot2Prog (0.2dgr resolution) For example PST Rotor Software

SPID RAK/HR CONTROLLER, type MD-02 with build in track interface USB controlled !

The MD-02 Controller has plug outs for, COM0, COM1, USB device, USB HOST ( in future ), I2C, SPI .
Also a ETHERNET module can be placed, aswell a RS425 or RS422 can be placed.

MD-02 has installed a fast processor, LPC1768 ( 100Mhz ) or LPC1769 ( 120Mhz ) with high program memory
A different programm or a modified programm can be easy add or changed.
Standard is a basic program installed, (functions similiar to BIG-RAS Driver) but custom made is possible.

The SPID RAK/HR needs a dual power supply, 15Volt / 22Volt
We will advise you Power Supply Unit PS-02

More options:

* Additional USB plug out
* Download data from PC through COM and USB.
* Change the MD-01 program through PC - write new software (there is no need to exchange processor !)
* There is a possibility of controlling external devices throughout l2C or SPI rail.
* Processor LPC1768 (32 bits and 512 processors memory)

PS-02, SPID Dual Voltage Power Supply unit for use with SPID RAK/HR and MD-01 or MD-02
This unit supplies the MD-0x unit and other units which need a other voltage and or more current.

We will advice you to use the SPID RAK/HR + MD-02 or MD-01 with Power Supply PS-02 or PS-01 with installed Module: 1* 150W / 15Volts - 10Amp and 1* 480W / 22Volts - 22Amp.
PS-0x module has a protected circuit for over voltage and automatic switch on/off ventilators
PS-0x unit is supplied incl connectors.

REQUEST OR ORDER BIG-RAS/HR ROTOR..........

Shipment is to lot's of countries possible, we will be
glad to E-mail you a quotation, or use the Quote request page.

All prices are inc. 21% VAT, if your delivery address is outsite the EU countries no V.A.T. applies, and no VAT applies, if you are inside the EU countries and holding a V.A.T. number.

Download SPID RAK/HR Specifications Sheet [589 KB] in PDF formats

SPID High Resolution support page is available for:
(Note: Page needs log-in, for RF HAMDESIGN Clients only

* Firmware update
* Download MD-01 Software
* Dirvers
* User Manual