RF HAMDESIGN 3 Meter PRIME FOCUS MESH DISH KIT (F/D=0.45)
This MESH DISH KIT is easy to assemble, 20mm square tube aluminium is used for the 12 rib contruction which are pre-assembled and ready to place at the 20cm, 10mm thickness CNC Milled aluminum centers.
The DISH KIT is supplied with a 3 or 4 leg feed support, all assembling parts and 6mm square mesh, which can be used up to 6cm band (max 6GHz).
You only need a hand driller, a hand riveter, Spanner No:10, a hand cutter, Wire Mesh cutter and some time to assemble this DISH KIT.
More 3 meter RF HAMDESIGN DISH pictures
ATTENTION 3.0 Meter Dish DELIVERY TIME:..................... |
---|
New orders for 3.0 Meter Dishes will be January / February 2025 shipment currently.
(Only available with F/D=0.45)
Last update: 6-11-2024
CONSTRUCTION: |
---|
3 METER DISH KIT SPECIFICATIONS : (Efficiency 65%) |
---|
Frequency | Gain dB | -3dB angle (dgr) |
1296 MHz | 30.3 | 5.7 |
2320 MHz | 35.4 | 3.2 |
3456 MHz | 38.8 | 2.1 |
5760 MHz | 43.3 | 1.3 |
WEIGHT: | 27 Kg | ex feed and mast clamp |
Brackets to interface Rotor and Dish: |
---|
This 3 Meter DISH KIT can be used with SPID Azimuth & Elevation rotator BIG-RAS (HR) or SPX-05 / 06.
(Dish with dish feed installed needs counter weights !)
More info regarding Spid AZ&EL rotator.
Available is a mounting bracket to interface rotor and 3M dish to SPID or SPX Rotator
We advise model:
Type BR03
or model
Type UA-02
More info and prices rotator rotator Mounting bracket
3 METER DISH KIT PRICE : |
---|
3 Meter Dish KIT delivererd inc. all mounting parts,
........all nuts (stainless steel)
........all bolts (stainless steel)
........all blind pop-rivets (incl. 4.1mm bore)
........3 or 4-leg feed support (depends on dish feed)
........mesh 6mm square / Galvanized steel
........CNC milled aluminium center
........do It Your Self manual incl lot's of picture's
This DISH KIT does Not include: Mast clamp, Dish feed / clamp.
We do ship daily World-Wide and will be glad to E-mail you a quotation.
1pc 3 meter Dish Kit will be packed in 2 shipping carton.
Bundle price and Specifications sheet download:.............. |
---|
Full setup Bundle:
To buy a full set 3M Mesh Dish including rotor system we made a setup with all the necessary parts:
This Bundle price is included: 3M0 Dish + Rotor system 0.1 degree resolution and controller + Control cable set + Rotor Power supply + Bracket to interface Dish and rotor
Download the bundle documentation [455 KB]
Specifications sheet:
Download 3 Meter Mesh Dish KIT Specifications Sheet [434 KB]
in PDF formats.
NEW---> 1296MHz (23cm Band) EME Full setup HAM Radio station...... |
---|
Due to the many requests we have summarized a complete list for an EME 1296MHz Setup HAM Radio Station.
This 3.0 Meter Mesh Dish Setup for 1296MHz EME is a Bundle setup completed incl all parts to start with EME (Earth-Moon-Earth) communication.
Not included is a Preamplifier, Receiver, Transmitter, coax cables etc.
But In a few words, a fully matched passive system to start with EME with an 3.0M dish + Moon Autotrack Rotor system and Circular Dual Mode dsh feed.
User info 3.0 Meter DISH 1296MHz:
Using 50....60Watts RF Output it is possible to operate various EME stations. A minimum of 150 Watt RF Output is required to hear your own echoes.
(Note: The RX Parts of your system should be in perfect condition with at least a 0.5dB NF preamplifier)
Above info is based by use of digital mode WSJTX
Download Full 3M0 Bundle list 1296MHz EME [355 KB]
in PDF Formats.
ORDER ONLINE: ORDER FORM
Available DISH FEEDS: |
---|
RF HAMDESIGN design and manufacture a wide range of RF DISH Feeds....
We can offer Linear single band up to a 5-band dish feeds from 1-10GHz, Helix dish feeds with Left Hand Circular Polarization from 1-4GHz, Dual Mode LHCP / RHCP Septum Dish feeds, High power single band Horn Dish feeds. (more DISH FEEDS)
We will be glad to E-mail you a quotation for your own frequency request, or use the Quote request page.
Fixed Elevation Dish Mounting Bracket P/N: BR-50B |
---|
Bracket used to mount your dish in a fixed position
This bracket can be fixed in elevation from 0 to max 90 degree.
Supplied including mast mounting bracket
BR-50B can be used with our Mesh Dishes up to 3 Meter diameter.
Weight: 6 Kg
Material: 5mm laser cut Steel plate, painted Black
Max. Mast mount standard 63....66mm diameter
Price BR-50B: Refer PRICE list
More pictures: Accessories part
3 Meter DISH KIT KIT pictures............ Dish setup SPID BIG-RAS Antenna Rotator. |
---|
3 Meter RF HAMDESIGN DISH Assembly at ESTEC (ESA) loaction The Netherlands. SPID BIG-RAS antenna rotator. (Earth orbit Satellite ground station) More ESTEC Pictures |
---|
Some User Pictures 3 Meter DISH KIT |
---|
3Meter RF HAMDESIGN Dish Kit mounted on a fixed tower and mobile station ! |
---|
3Meter RF HAMDESIGN Dish Kit Norway, Clubstation LA1K University Trondheim, Norway Visit LA1K |
---|
RF HAMDESIGN 3Meter DISH and BIG-RAS/HR+ UA-02 rooftop Antenna system U.S. Naval Academy. Ground Station Network small satellites (CubeSat) |
---|
RF HAMDESIGN and Whatsapp:
WhatsApp: +31 650 882 889
(NO TECHNICAL SUPPORT QUESTIONS ! )
Important: before contacting us:
Only during business hours, only in english or Dutch, only for sales matters. For technical questions, technical support matters please contact us by E-Mail, see our contact RF HAMDESIGN page.
Please allow a delay of 15 minutes for the first reply.
This WhatsApp is only for TEXT / No Phone call / No Video
Mesh Parabolic Dish DISH Feeds Spid Antenna Rotators NEWS Antenna Power Splitters Directional Couplers RF Circulator 3dB Hybrid couplers RF WATT meters PRICE LIST Contact RF HAMDESIGN ISS HAM TV
(C) RF HAMDESIGN 2023