How to use ??

KLIK HIER VOOR NEDERLANDSE VERSIE

RF HAMDESIGN Aluminium welding rods can be used for aluminium welding and repairs .
And you can go one step further - it can be used on copper, brass, zinc, pot metals, die-cast aluminium and galvanized steel.

Now be really amazed ... You can even weld these dissimiliar metals together!

Welding is very simple. There is only one rod type, which works on all grades and alloys of aluminium. You do not need to identify the specific alloy or choose a brazing filler to match.

You only need a handheld torch - Oxyacetylene, Mapp, Propane or Butane and a stainless steel brush to clean the workpiece.

RF HAMDESIGN Aluminium welding is a unique 3 in 1 application. Brazing, Soldering or Welding Aluminium is now as easy as 1-2-3. There is no need for expensive equipment. No need for years of welding experience. It's convenient and can be used by both novice and professional alike.

Welding aluminium without the use of flux, produces a joint sound and free from porosity. It will work on galvanised steel, also used as a Rub-on solder. Use a slightly carbonized flame ( excess of acetylene ), with small tip for most work.

MELTING POINT 389'C ( 732'F )

• Technical Specifications:
• Tensile Strength, kg/sq. cm 3304
• Compression Strength, kg/sq. cm 4200 - 5250
• Shear Strength, kg/sq. cm 2390
• Charpy Impact Strength kg/sq. cm 0.52 kg/m to break 0.635 cm bar
• Hardness (Brinell)100
• Ductility good Good
• Melting Point 389` C
• Specific Gravity 6.7
• Density 6.92 g/cu. cm
• Elongation (in 5cm) 3%
• Coefficient of Linear Expansion 15.4*10-6/~F
• Electrical Conductivity 24.9% of Copper
• Thermal Conductivity 0.24 cal/cu. cm/~C